Water Purification System Performa, INNOVA
A water production system is a system that involves the receipt of water with specified characteristics from the tap, its storage and the possibility of distribution between one or more distribution points to end consumers.
The water treatment system has a wide application value for any research and development.
- All-in-one system Performa EU10/EU15/EU20 (Production flow rate 10/15/20 L/H)
- Type II water Performa E10/E15/E20 (Production flow rate 10/15/20 L/H)
- Type I water Performa U
| All-in-one system Performa EU10/EU15/EU20 | Type II water
Performa E10/E15/E20 |
Type I water
Performa U |
|
| Pre-treatment module | YES | YES | NO |
| Main host | YES | YES | YES |
| Pre-guard cartridge A | YES | YES | NO |
| Pre-guard cartridge B | YES | YES | NO |
| Pre purification cartridge A | NO | NO | YES |
| Pre purification cartridge B | NO | NO | YES |
| Two-stage Reverse osmosis | YES | YES | NO |
| EDI module self-developed | YES | YES | NO |
| 60L water tank; stepless water level sensor | YES | YES | NO |
| 254nm UV light of water tank | YES | YES | NO |
| Inlet air filter of water tank 0.2µm | YES | YES | NO |
| Water leakage protection sensor | YES | YES | YES |
| Dual wavelength (254nm & 185nm ) UV-lamp | YES | NO | YES |
| TOC monitoring | YES | NO | YES |
| Ultra purification cartridge A | YES | NO | YES |
| One integrated type I water dispenser arm | YES | YES | YES |
| 1M water piping from main unit to water dispenser arm | YES | YES | YES |
| Point-of-use filter 0.22 µm | YES | YES | YES |
* Optional ultra purification cartridge B special for semiconductor industry that has higher deionization requirements
Characteristics
| All-in-one system Performa EU10/EU15/EU20 | Type II water
Performa E10/E15/E20 |
Type I water
Performa U |
|
| Feed water requirement | |||
| Source | Potable tap water | Type II water/RO | |
| Conductivity | <2000μS/cm | <100μS/cm | |
| TOC | <1ppm | < 50ppb | |
| Hardness* | <450ppm CaCO3 | 0-1ppm | |
| Pressure | 0.1~0.4Mpa (7-72psi) | 0.1~0.4Mpa (7-72psi) | |
| Temperature | 5~45℃ | 5~45℃ | |
| PH | 4-10 | 7/6-8 | |
| Type II high purified water | |||
| Resistivity at 25℃** | 15MΩ.cm; typically 10-15 MΩ.cm | N/A | |
| Conductivity at 25℃** | 0.067μS/cm; typically 0.1μS/cm | ||
| TOC | <30ppb(g/L) | ||
| Particulates with size > 0.22m*** | No particles | ||
| Endotoxin (Pyrogens)*** | <0.001EU/mL | ||
| Bacteria*** | <0.01cfu/mL (<10cfu/L) | ||
| Rnase*** | <1pg/mL | ||
| Dnase*** | <3pg/mL | ||
| Proteases*** | <0.15μg/mL | ||
| RO rejection | ≥99% | ||
| EDI ion rejection | ≥99% | ||
| Production flow rate | 10/15/20 L/H | ||
| Manual control water f low rate | Maximum 2L/min, stepless control of f low rate | ||
| Quantitative water dispense range | 10mL ~ 60L | ||
| Type I ultra purified water | |||
| Resistivity at 25℃ | 18.2 MΩ.cm | N/A | 18.2 MΩ.cm |
| Conductivity at 25℃ | 0.055µS/cm | 0.055µS/cm | |
| TOC | 2ppb(g/L) | 2ppb(g/L) | |
| Particulates with size > 0.22µm | No particles | No particles | |
| Endotoxin (Pyrogens) | <0.001EU/mL | <0.001EU/mL | |
| Bacteria | <0.01cfu/mL (<10cfu/L) | <0.01cfu/mL (<10cfu/L) | |
| Rnase/Dnase | Free | Free | |
| Proteases | <0.15μg/mL | <0.15μg/mL | |
| Manual control water flow rate | Maximum 2L/min, stepless control of flow rate | Maximum 2L/min, stepless control of flow rate | |
| Quantitative water dispense range | 0.01L ~ 60L | 0.01L ~ 60L | |
*If the tap water contains a high rate of calcium ions and magnesium ion which do not meet the requirement, please use salty box to remove part of calcium ions and magnesium ion in advance
**Resistivity typically 10-15MΩ.cm at 25℃, Conductivity typically 0.1μS/cm, at 25℃
***Feed water quality should meet above requirements and purified water through the remote water dispenser with end 0.22µm filter
Related products
Lab Equipment
Lab Equipment
Lab Equipment
Lab Equipment
Lab Equipment